vi
Other
• A CMOS IC is used in the control board. Handle the control board and CMOS IC carefully.
The CMOS IC can be destroyed by static electricity if touched directly.
• Do not change the wiring, or remove connectors or the Digital Operator, during operation.
Doing so can result in personal injury.
• Do not attempt to modify or alter the Inverter.
Doing so can result in electrical shock or injury.
• Do not subject the Inverter to halogen gases, such as fluorine, chlorine, bromine, and iodine, at any
time even during transportation or installation.
Otherwise, the Inverter can be damaged or interior parts burnt.
TOE-S616-60.1.book vi ページ ２０１７年８月４日 金曜日 午後３時４１分
To Next Page
Loading...
