120
* These I/O signals can be used from DeviceNet communications only. There
are no corresponding external input or output terminals.
0009H Output terminal status
Bit 0 Multi-function output reference 1*
(Enabled when n057 is set to 18.)
1: MA ON
0: MA OFF
1 Multi-function output reference 2
(Enabled when n058 is set to 18.)
1: P1 ON
0: P1 OFF
2 Multi-function output reference 3
(Enabled when n059 is set to 18.)
1: P2 ON
0: P2 OFF
3 to
F
Not used.
000AH to
001FH
Reserved
Register
Number
Contents
To Next Page
Loading...
