5. Operating the Inverter
53
Simple Data Setting
Digital setting (refer to 5. Operating the Inverter) and potentiometer
setting are both possible for simple acceleration/deceleration operation
of the Varispeed V7.
DeviceNet communications are set to enabled at the factory (n004=9).
Simple Operation from the Digital Operator Using Frequency
Reference
Following is an example in which forward and reverse run is performed
with a standard motor with frequency set to 1,800 r/min, acceleration
time set to 15 s, and deceleration time set to 5 s. (Refer to page 127 for
details on parameter settings.)
To Next Page
Loading...
