24
3. Mounting
Choosing a Location to Mount the Inverter
Be sure the Inverter is protected from the following conditions.
• Extreme cold and heat. Use only within the specified ambient tem-
perature range:
−10 to 50°C (14 to 122°F) for IP20 (open chassis type),
−10 to 40°C (14 to 105°F) for NEMA 11 (TYPE 1), IP 20 (top
closed type)
• Rain and moisture
• Oil sprays and splashes
• Salt spray
• Direct sunlight (Avoid using outdoors.)
• Corrosive gases (e.g., sulfurized gas) or liquids
• Dust or metallic particles in the air
• Physical shock or vibration
• Magnetic noise (Examples: Welding machines, power devices, etc.)
• High humidity
• Radioactive substances
• Combustibles, such as thinner or solvents
To Next Page
Loading...
