7. Programming Features
165
Factory Settings
Note: Terminal MA can be used only from DeviceNet communications. There
is no corresponding external output terminal.
8 Low torque detected,
NO output
--
9 Low torque detected,
NC output
--
10 Minor fault Closed when an alarm has been
detected.
-
11 Baseblocked Closed when the Inverter output
is OFF.
-
12 Operating mode Closed when LOCAL is selected
for the LOCAL/REMOTE selec-
tion.
-
13 Inverter operation ready Closed when an Inverter fault is
not detected, and operation is
ready.
-
14 Fault restart Closed during fault retries. -
15 UV Closed when undervoltage is de-
tected.
-
16 Reverse run Closed during reverse run. -
17 Speed search Closed when Inverter conducts a
speed search.
-
18 Data output from com-
munications
-
19 PID feedback loss Closed during PID feedback loss 183
20 Frequency reference
loss
--
21 Inverter overheat alert
(OH3)
--
No. Terminal Factory Setting
n057 MA (See note.) 2 (frequency agree)
n058 P1 1 (operating)
n059 P2 0 (fault)
Setting Name Description Ref.
To Next Page
Loading...
