7. Programming Features
187
Prohibiting Constant Read Selection (n177)
Select this function to prevent accidentally overwriting the constants
stored in EEPROM or in the Digital Operator. Reading is not possible
when this constant is set to 0.
The constant data stored in the Digital Operator are safe from accidental
overwriting.
If reading is attempted while this constant is set to 0, PrE will flash.
Press DSPL or ENTER and return to the constant No. display.
Constant
No.
Name Unit Setting Range Factory
Setting
n176 Constant
Copy Func-
tion Selection
-rdy: READY
rEd: READ
CPy: COPY
vFy: VERIFY
vA: Inverter capacity
display
Sno: Software No. dis-
play
rdy
Constant
No.
Name Unit Setting Range Factory
Setting
n177 Constant
Read Selec-
tion Prohibit
1 0: READ prohibited
1: READ allowed
0
To Next Page
Loading...
