I
'_ I Sets V/f pattern
Maximum output frequency (Hz) which matches
_ _ Sets the maximum output frequency, the motor
t _ characteristics
according to
_ Maximum voltage (V) I FMAX, VMAX I
Sets the maximum voltage that VS mini and FBAS.
' outputs. (Motor rated voltage setting)
VOLTAGE
VMAX................... ,
Setting _ Maximum v°ltage °utput frequency (Hz) I i i
J _ Setsfrequency when the maximum
enabled voltage is output. (Base frequency)
only __ _ FREQf
during - ,"_.. Fe_s_MAk
StOp. _
'] Electronic thermal reference current (A)
a _ Sets motor rated current. The following
tableshows the standard setvalue for
each capacity. When the applicable
motor rated current value differs from
the value listed below, change the set
value. When set to O.OA,motor overload
protection will not be activated.
VSmini Model 20P12020=220P4I20P721P5
CIMR-XC_!AL._] BOP _((,_ BOPz BOP7
CIMR-XC -;E C_ AOP: AOPz _,0P7
Max.App,icable 0.12 l(0c_250.5 1 2
Motor Output HP(kV_ (0.1;,.__, (0.4} 0.,'5:1.5)i
Motor Current 0.6 1.1 1.9 3.3 6.2 ]
Factory Setting (A)
1
24
To Next Page
Loading...
