Setting Setting Inital User Ref.
No. Name Range Unit Settin Setting :+age
20 Accelerationtime1 lO.0s
0.1s
21 Decelerationtime I (less than 100s)/ lO.Os 23.
0.o to 999s 1s 10 Os I 33
!22 Accelerationtime2 (100s or more)
23 Deceleration time 2 lO.Os
0.1Hz(lessthan100Hz)]
Maximum output 50.0 to 400Hz 1Hz(100Hzormore) 60.0Hz
24 frequency
25 Maximum voltage 1 to 255V 1V 230V 24,
51
26 Maximum voltage 0.6 to 400Hz 0+lHz(lessthan100Hz)/
OUtputfrequency 1Hz(100Hzormore) _0.0Hz
27 Mid. output 0.5 to 399Hz O.lHz(lessthanl_Hz)/ 1.5Hz
frequency tHz(tCOHzormorn)
28 Mid. output 1 to 255V 1V 12V
frequency voltage 51
29 Mr,nTurno,Jtput#_emoy 0.5 to 10.0Hz 0.1Hz 1.5Hz
Minimum outpul 1 to 50V 1V 12V
30 frequency voltage
24,
31 Electronic thermal 3to 120%o_inverter 0.1A
reference current !ratedcurrent 57
32 Electronic thermal 0 to 4 1 0 57
motor protection
33 Stanprevention(currentlimit) 0.1 I 0 55
duringdeceleration
$taIIpreven_n'(currentli_t) " 30 to 200% 1% 170% 54
34 levelduringacceleration
Stalli:_evention(currentliner) 30 to 200% 1% 160% 55
35 levetduringrunning
36 Operationselectionafter O to 2 1 0 34
momentraypower1ass
_ow-carrier 1 1=2.5kHz 1
:ype (2.5 kHz) (Carrier frequency ._.5kHz)l
37 Carrier 42
frequency Low-noise 1 to 6 =set value 4
_ype (2.5 to 15kHz) + x2.5kHz) (10kHz)
38 Automatictc,'queboostgain 0.0 to 3.0 0.1 1.O 53
39 Frequencyreferencegain 0.10 to 2.00 0.01 1.00
32
40 Frequencyreferencebias -99 to 99% 1% 0%
41 Frequencylelemnceup_b_l O to 110% 1% 100%
33
42 Frequencylefaencelowerl_n_0 to 110% _ 1% 0%
* Differs depending on the inverter caoacity.
t Selling range is I to 4 for software version No. NSP 600101or before.
75
To Next Page
Loading...
Need help?
General