User Guide for T4 Series IP Phones
192
Call Pull
Placing Calls
Boss or secretary can have one call or multiple calls on the shared line.
Placing a Call on the Shared Line
Procedure:
Do one of following:
- Enter the desired number using the dialpad when the phone is idle. Press the OK key, # key,
or Send.
The phone dials the entered number using the first line key.
- Press the line key when the phone is idle to enter the dialing screen.
Enter the desired number using the dialpad, and then press the OK key, # key, or Send.
The phone dials the entered number using the selected line key.
Placing Multiple Calls on the Shared Line
Procedure:
You can have more than one call on the shared line. To place a new call when there is an active
call on the line key 1, do one of the following:
- Press the HOLD key or Hold. The original call is placed on hold.
Press New Call (NewCall) to enter the dialing screen.
Enter the desired number using the dialpad.
Press the OK key, # key, or Send.
The phone dials the entered number using the line key 2 automatically.
- Press the line key. The original call is placed on hold.
Enter the desired number using the dialpad.
Press the OK key, # key, or Send.
The phone dials the entered number using the selected line key.
Answering Calls
You can have one call or multiple calls on the shared line. Incoming calls will be distributed
evenly among the available line keys.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
Weight and Dimensions
