EasyManuals Logo

Yealink SIP-T40G User Manual

Yealink SIP-T40G
253 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #206 background imageLoading...
Page #206 background image
User Guide for T4 Series IP Phones
194
Procedure:
Role
You can do…
Status
Boss
On the SIP-T48S/T48G
IP phone:
Tap the line key 2.
Tap Answer.
Tap the incoming
call item. Press the OK
key or tap Answer.
Secretary phone stops ringing.
The original call is placed on hold.
The icon indicators of the line key 1 on boss
phone and secretary phone becomes and
solid indicating that there is the held call on the
line key 1. The icon indicators of the line key 2
on boss phone and secretary phone becomes
and solid indicating that there is an active
call on the line key 2.
On other IP phones:
Press the line key 2.
Press Answer.
Press the down
navigation key to
access the new call.
Press the OK key or
Answer.
Secretary phone stops ringing.
The original call is placed on hold.
The LED indicators of the line key 1 on boss
phone slowly flashes green and secretary
phone slowly flashes red indicating that there is
the held call on the line key 1. The LED
indicators of the line key 2 on boss phone
glows green and secretary phone glows red
indicating that there is an active call on the line
key 2.
Secretary
On the SIP-T48S/T48G
IP phone:
Tap the line key 2.
Press the OK key or
tap Answer.
Boss phone stops ringing.
The icon indicators of the line key 2 on boss
phone and secretary phone becomes and
solid indicating that there is an active call on
the line key 2. Meanwhile, the icon indicators of
the line key 1 on boss phone and secretary
phone becomes and solid indicating that
there is the held call on the line key 1.
On other IP phones:
Press the line key 2.
Press the OK key or
Answer.
Boss phone stops ringing.
The LED indicators of the line key 2 on boss
phone glows red and secretary phone glows
green indicating that there is an active call on
the line key 2. Meanwhile, The LED indicators of
the line key 1 on boss phone glows green and
secretary phone glows red indicating that there
is an active call on the line key 1.
Note
If the number of incoming calls is greater than the configured line keys, the line keys will be used
by sequence circulation.
Downloaded from ManualsNet.com search engine

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals