EasyManuals Logo

Yealink SIP-T40G User Manual

Yealink SIP-T40G
253 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #209 background imageLoading...
Page #209 background image
Advanced Phone Features
197
Role
You can do…
Status
(NewCall) and Retrieve appear on the
touch screen.
Tap Retrieve to retrieve the call.
automatically. And the line key
icon on boss phone and
secretary phone becomes .
On other IP phones:
Press the line key.
Long press the desired line key.
The Cancel, Call Pull (CallPull), New Call
(NewCall) and Retrieve appear on the
LCD screen.
Press Retrieve to retrieve the call.
The conversation is established
between secretary and the third
party, while boss phone
disconnects the call
automatically. And the line key
LEDs on boss phone glows red
and secretary phone glows
green.
Retrieving a Call Placed on Private Hold
The private held call can be only retrieved by the hold party.
Procedure:
Role
You can do…
Status
Boss
Call is private held by boss:
On the SIP-T48S/T48G IP phone,
tap , press the HOLD key or tap
Resume.
On other IP phones, press the line key,
the HOLD key or the Resume.
The conversation between boss
and the third party is retrieved.
Secretary
Call is private held by secretary:
On the SIP-T48S/T48G IP phone,
tap , press the HOLD key or tap
Resume.
On other IP phones, Press the line key,
the HOLD key or Resume.
The conversation between
secretary and the third party is
retrieved.
Barging In an Active Call
Both the boss and the secretary can barge in an activate call and set up a conference call with
the other parties.
During the conference, if any party in the conference call presses the HOLD key or the Hold soft
key, two-way voice can be heard between the remaining parties. If boss or secretary press the
End Call (EndCall) soft key, the remaining parties are still connected. If the other party (not the
shared line party) press the End Call (EndCall) soft key, the conference call is ended.
Downloaded from ManualsNet.com search engine

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals