Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
112
 Transfer
 Hold
 DND
 Group Listening
 Zero Touch
 URL
 Phone Lock
 Directory
For the features not listed above, refer to Basic Call Features on page 133 and Advanced Phone
Features on page 183. For more information, contact your system administrator.
Line
You can use this key feature to accept incoming calls, place active calls on hold or resume a
held call. It performs in the same way as a hard line key.
Dependencies: Type (Line)
Account ID (the account this feature will be applied to)
Label (key label displayed on the touch screen)
Usage: When the phone receives an incoming call,
1. Tap the Line key to accept the incoming call.
2. Tap the Line key to place a new call and the active call is placed on hold.
3. Tap the Line key again to resume the held call.
Speed Dial
You can use this key feature to speed up dialing the numbers frequently used or hard to
remember.
Dependencies: Type (SpeedDial)
Account ID (the account this feature will be applied to)
Label (key label displayed on the touch screen)
Value (the number you want to dial out)
Usage: Tap the Speed Dial key to dial out the number specified in the Value field, using the
account selected from the Account ID field.
Voice Mail
You can use this key feature to quickly connect voice mail. For more information, refer to Voice
Mail on page 243.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm