Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
146
The mute key LED illuminates solid red. The touch screen indicates that the call is now
muted.
To un-mute a call:
1. Press again to un-mute the call.
The mute key LED goes out.
Muting While Dialing
To mute the microphone while dialing:
1. Press on the pre-dialing, dialing or calling screen.
The mute key LED illuminates solid red. The call is muted automatically when set up
successfully.
To un-mute the microphone while dialing:
1. Press again on the pre-dialing, dialing or calling screen.
Note
Call Hold/Resume
You can place an active call on hold. Only one active call can be in progress at any time. Other
calls can be made and received while placing the original call on hold. When you place a call on
hold, your IP PBX may play music to the other party while waiting.
To place a call on hold:
1. Press or tap the Hold soft key during a call.
You can also mute the microphone when the IP phone is ringing.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm