Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
202
5. Enter the URL (e.g., http://10.1.2.224/phonerecording.cgi) in the Value field.
6. Tap the Save soft key to accept the change or to cancel.
URL record key is configurable via web user interface at the path Dsskey->Line Key.
Recording a Call
To record a call:
1. Tap the record key or URL record key during a call.
If the recording starts successfully, the recording icon will appear on the touch screen and
the icon of the record key or URL Record key changes to .
2. Tap the record key or URL record key again to stop recording.
The recording icon disappears from the touch screen and the icon of the record key or URL
record key changes to .
Recording status indicators you need to know:
Circumstance
Icons on the touch screen
A recording is started
appears on the touch screen
A recording cannot be started
appears for 1 second
A recording cannot be stopped
appears for 1 second, then goes back
The recording box is full
appears for 1 second
The call cannot be recorded
appears for 1 second
You can listen to the recordings stored on your server system. For example, you can dial an
access code to listen to the recordings.
Note
The way in which you listen to the recordings may be different depending on the server. Contact
your system administrator for more information.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm