Yealink SIP-T48G User Manual

Customizing Your Phone
47
This field appears only if Screensaver Type is set to Custom.
The custom picture appears in Screensaver list. You can only delete the custom picture by
clicking Del in the Screensaver field.
Note
Configuring the Screen Saver
To configure the screen saver via phone user interface:
1. Tap ->Basic->Display->Screensaver.
2. Tap the gray box of the Wait Time field, and then select the desired wait time from the
pull-down list.
3. Tap the On or Off radio box of the Display Clock field.
4. Tap the gray box of the Screensaver Type field and then select the desired screen saver
type from the pull-down list.
This field is configurable only if you have uploaded a custom picture via web user interface.
- If you select System.
The IP phone will automatically set the built-in picture as the screen saver.
- If you select Custom.
You can only upload one custom image at a time via web user interface.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm