User Guide for the SIP-T48G IP Phone
120
Ext Keys
If EXP40 is connected to the phone, you can customize features for ext keys.
To customize ext keys via phone user interface:
1. Long press the desired ext key on EXP40.
The IP phone LCD screen will enter the user setting interface of this key.
2. Customize the specific feature for this key on the IP phone.
3. Tap the Save soft key to accept the change or to cancel.
Ext keys are configurable via web user interface at the path Dsskey->Ext Key.
For more information, refer to
Yealink EXP40 User Guide
.
Account Management
You can register one or multiple accounts on the SIP-T48G IP phone. You can also configure
each line key to associate with an account or configure multiple line keys to associate with an
account.
Account Registration
To register an account via phone user interface:
1. Tap ->Advanced (default password: admin) ->Account.
2. Tap the desired account.
3. Tap the gray box of the Activation field, and then select Enabled from the pull-down list.
4. Enter the desired value in the Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 field respectively. Contact your system administrator for
more information.
5. If you use the outbound proxy servers, do the following:
1) Tap the gray box of the Outbound Status field, and then select Enabled from the
pull-down list.
2) Enter the desired value in the Outbound Proxy1/2 and Proxy Fallback Interval field
respectively. Contact your system administrator for more information.
6. Tap the Save soft key to accept the change or to cancel.
You can repeat steps 2 to 6 to register more accounts.
The following figures demonstrate single or multiple accounts registered on the phone:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
