Yealink SIP-T48G

User Guide for the SIP-T48G IP Phone
76
5. Edit the corresponding fields.
6. Tap the Save soft key to save the contact to the local directory.
If the contact already exists in the local directory, the touch screen will prompt “Overwrite
the original contact?”. Tap OK to overwrite the original contact in the local directory or
Cancel to cancel.
For more information on remote phone book operation, refer to Remote Phone Book on page
90.
Editing Contacts
To edit a contact in the local directory:
1. Tap .
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 66), tap
->Directory->All Contacts to enter the local directory.
2. Tap after the desired contact.