Yealink SIP-T48G

User Guide for the SIP-T48G IP Phone
130
Live Dialpad
You can enable live dialpad feature on the SIP-T48G IP phone, which enables the IP phone to
automatically dial out a phone number without pressing the send key. You can also configure a
delay, and then the phone will dial out the phone number automatically after the designated
period of time.
To enable the live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
The default delay time is 4.
4. Click Confirm to accept the change.
Note
Hotline
You can dial a hotline number immediately upon lifting the handset, pressing the Speakerphone
key or tapping the line key. You can also configure a delay, and then the phone will dial out the
hotline number automatically after a designated period of time.
Live dialpad is configurable via web user interface only.