Yealink SIP-T48G

User Guide for the SIP-T48G IP Phone
116
Key Type (Forward)
Label (key label displayed on the touch screen)
Value (the number you want to forward to)
Usage: Tap the Forward key to forward an incoming call to the number specified in the Value
field.
Note
Transfer
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies: Type (Key Event)
Key Type (Transfer)
Label (key label displayed on the touch screen)
Value (the number you want to transfer to)
Usage:
 When the transfer mode on DSS key is Blind Transfer, tap the Transfer key to complete
the blind transfer to the number specified in the Value field.
 When the transfer mode on DSS key is Attended Transfer, tap the Transfer key to dial
out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
 When the transfer mode on DSS key is New Call, tap the Transfer key to place a new call
to the number specified in the Value field.
Note
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies: Type (Key Event)
Key Type (Hold)
Label (key label displayed on the touch screen)
Usage:
1. Tap the Hold key during an active call to place the call on hold.
2. Tap the Hold key again to retrieve the held call.
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode via Dsskey.
If the Value field is left blank, the Transfer key performs the same as the TRANSFER key or the
Transfer soft key during a call. For more information, refer to Call Transfer on page 163.
If the Value field is left blank, the Forward key performs the same as Forward when receiving
an incoming call.