Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
118
4. Tap the Next soft key.
5. Configure the auto provision parameters in the corresponding fields.
6. Tap the Next soft key.
The phone will reboot to update configurations.
URL
You can use this key feature to trigger the phone to send an HTTP GET request containing a
specific URL.
Dependencies: Type (URL)
Label (key label displayed on the touch screen)
URL (the URL contained in the HTTP GET request)
Usage: Tap the URL key to trigger the phone to send an HTTP GET request containing the URL
specified in the URL field.
Phone Lock
You can use this key feature to immediately lock your phone instead of long pressing . For
more information, refer to Phone Lock on page 58.
Dependencies: Type (Key Event)
Key Type (Phone Lock)
Label (key label displayed on the touch screen)
Usage: When the Phone Lock feature is enabled, tap the Phone Lock key to immediately lock
your phone instead of long pressing .
Directory
You can use this key feature to easily access frequently used lists. For more information, refer to
Directory on page 66.
Dependencies: Type (Key Event)
Key Type (Directory)
Label (key label displayed on the touch screen)
Usage: Tap the Directory key to immediately access frequently used lists.
Note
Programable Keys
You can customize the soft keys, navigation keys and function keys.
To customize programable keys via web user interface:
1. Click on Dsskey->Programable Key.
The Directory key performs the same function as the Directory soft key when the phone is idle.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm