Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
122
2. Tap the gray box of the Default Account field, and then select the desired account from
the pull-down list.
3. Tap the Save soft key to accept the change or to cancel.
The label of the default account is displayed on the left of the status bar. The IP phone will use
this account by default when dialing out.
You can tap the label of the default account, and then tap the desired account to be the new
default account. You can also press or to select the desired account as the default
account.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm