Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
126
number matches the dial now string, the number will be dialed out automatically. For example, a
dial now rule is configured as "2xx", any entered three-digit string beginning with 2 will then be
dialed out automatically on the phone.
To add a dial now rule via web user interface:
1. Click on Settings->Dial Plan->Dial Now.
2. Enter the desired value (e.g., 2xx) in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
For more information on the valid values for the Account field, refer to Replace Rule on
page 124.
4. Click Add to add the dial now rule.
When you enter the number “234” using the keypad, the phone will dial out “234”
automatically without the pressing of any key.
Note
Time Out for Dial Now Rule
You can configure the delay time for dial now rules. That is, you can configure your phone to
automatically dial out the phone number which matches a dial now rule, after the designated
delay time.
To configure the delay time for dial now rule via web user interface:
1. Click on Features->General Information.
2. Enter the time between 0 and 14 (seconds) in the Time Out for Dial Now Rule field.
You can also edit or delete the dial now rule, refer to Replace Rule on page 124 for more
information.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm