Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
150
The icon appears on the status bar.
Note
To activate DND in custom mode:
1. Tap .
The touch screen displays a list of accounts registered on the phone.
2. Tap the desired account.
3. Tap the On radio box of the DND Status field.
4. (Optional.) Enter the DND on code or off code respectively in the On Code or Off Code
field.
If the on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate DND on the server. It is not available on all servers.
5. Tap the Save soft key to accept the change.
If you want to activate DND for all accounts, you can press the All On soft key.
When DND and busy forward are activated in phone mode, calls will be sent to the configured
destination number. For more information on busy forward, refer to Call Forward on page 153.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm