Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
152
If you activate DND for all accounts, all line icons will change to and the icon will
appear on the status bar.
Note
You can receive incoming calls from authorized numbers when DND is activated.
To configure the DND authorized numbers via web user interface:
1. Click on Features->Forward&DND.
2. Select Enabled from the pull-down list of DND Emergency.
3. Enter the numbers in the DND Authorized Numbers field.
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When DND and busy forward are activated for a specific account, calls from the specific account
will be sent to the configured destination number. For more information on busy forward, refer
to Call Forward on page 153.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm