Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
154
To configure the call forward mode via web user interface:
1. Click on Features->Forward&DND.
2. In the Forward block, mark the desired radio box in the Mode field.
3. Click Confirm to accept the change.
Note
To activate call forward in phone mode:
1. Tap ->Features->Call Forward or press when the phone is idle.
2. Tap the desired forwarding type.
3. Depending on your selection:
a) If you tap Always Forward:
1) Tap the On radio box of the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward to field.
Call forward mode is configurable via web user interface only.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm