Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
156
4) (Optional.) Enter the no answer forward on code or off code respectively in the
On Code or Off Code field.
4. Tap the Save soft key to accept the change.
The icon on the idle screen indicates that the call forward is activated.
To activate call forward in custom mode:
1. Tap ->Features->Call Forward or press when the phone is idle.
2. Tap the desired account.
3. Tap the desired forwarding type.
4. Depending on your selection:
a) If you tap Always Forward:
1) Tap the On radio box of the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward to field.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm