Yealink SIP-T48G

User Guide for the SIP-T48G IP Phone
158
3) (Optional.) Enter the busy forward on code or off code respectively in the On
Code or Off Code field.
You can also activate busy forward for all accounts. Do the following:
1) Tap the All Lines soft key.
The touch screen prompts “Copy to all lines?”.
2) Tap OK to accept the change or Cancel to cancel.
c) If you select No Answer Forward:
1) Tap the On radio box of the No Answer Forward field.
2) Enter the destination number you want to forward unanswered incoming calls to
in the Forward to field.
3) Tap the gray box of the After Ring Time field, and then select the desired ring
time to wait before forwarding from the pull-down list.
The default ring time is 12.