Yealink SIP-T48G User Manual

Basic Call Features
173
- If the call park code is configured, the phone will dial the configured call park code
shown as below:
2. Do one of the following:
a) If you want to park the call against the local extension.
1) Press .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
b) If you want to park the call against desired extension.
1) Enter an extension (e.g., 4606) where you want to park the call.
2) Press or .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
To retrieve a parked call in FAC mode:
1. Do one of the following:
- If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
- If the park retrieve code is configured, tap Retrieve on the dialing screen or press
retrieve park key (if configured) on the IP phone.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm