Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
182
rejection on/off code to the server to activate/deactivate anonymous call rejection on the server
side.
To configure anonymous call rejection via phone user interface:
1. Tap ->Features->Anonymous.
2. Tap the desired line.
3. Tap the On radio box of the Local Anony Rejection field.
4. (Optional.) Tap the On Code or Off Code radio box of the Send Rejection Code field.
5. (Optional.) Enter the anonymous call rejection on code and off code respectively in the On
Code and Off Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call rejection feature on the phone.
6. Tap the Save soft key to accept the change or to cancel.
Anonymous call rejection is configurable via web user interface at the path Account->Basic.
If phone B has anonymous call feature enabled and places a call to your IP phone, the call will be
rejected, and the touch screen of the phone B will display the following:

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm