User Guide for the SIP-T48G IP Phone
186
The BLF key icon flashes red.
The caller ID appears on the touch screen (if enabled).
In the following figure, the touch screen shows an incoming call from 1008 on the monitored
line.
You can do the following actions:
- Tap the Pick Up soft key to pick up the call.
- Tap the Send soft key to dial out the monitored phone number.
- Tap the New Call soft key to place a new call.
- Tap the Cancel soft key to exit the screen.
Note
Configuring Directed Call Pickup Code
If you configure the directed call pickup code in advance, you can pick up the monitored user’s
incoming call by tapping the BLF key. You can configure the directed call pickup code when
configuring a BLF key. For more information, refer to Configuring a BLF Key on page 183. You
can also configure the directed call pickup code on a global or per-line basis via web user
interface.
If you enable visual alert feature, you can also pick up the monitored user’s incoming call by
tapping the DPickup soft key. To use DPickup soft key to pick up the call, the call pickup code
can only be configured on a global or per-line basis via web user interface.
Note
If your phone is locked, you cannot use the Pick Up, Send, New Call and Cancel soft keys until
unlocked. For more information, refer to Phone Lock on page 58.
The pickup code is used in the following order of preference: Extension (Dsskey->Line
Key)>Directed Call Pickup Code (Account->Advanced)>Directed Call Pickup Code
(Features->Call Pickup). If pickup code is not configured, tapping the BLF key/DPickup soft key
will directly call the monitored user when he/she receives an incoming call.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
