Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
194
The following figure shows an example:
Note
The Start REC soft key controls the recording function, and is available:
 The free space of USB flash drive is sufficient
 When there are one or more calls connected to your IP phone
 During an active call
 When calls are on hold or muted
 During an attended transfer
 During a conference call
The Start REC soft key is not available when:
 You place a new call
 No free space of USB flash drive
 The phone prompts you to answer an incoming call
Call Recording
You can record active calls or conferences.
To record a call:
1. Tap the More soft key, and then tap the StartREC soft key during a call.
Recording using a USB flash drive is not available by default. For more information, contact your
system administrator.
The size of a single recording file should be less than 2G.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm