Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
228
Do one of the following on phone A:
- Tap the line key 2. Phone B stops ringing.
- Tap the Answer soft key. Phone B stops ringing.
- Tap the incoming call item.
Press or tap the Answer soft key. Phone B stops ringing.
The incoming call is answered and the original call is placed on hold. The icon indicators of the
line key 1 on phone A and phone B will become and solid indicating that there is the held
call on the line key 1. The icon indicators of the line key 2 on phone A and phone B will become
and solid indicating that there is an active call on the line key 2.
You can also answer the call on phone B. Do one of the following on phone B:
- Tap the line key 2. Phone A stops ringing.
- Press or tap the Answer soft key. Phone A stops ringing.
The icon indicators of the line key 2 on phone A and phone B will become and solid
indicating that there is an active call on the line key 2. Meanwhile, the icon indicators of the line
key 1 phone A and phone B will become and solid indicating that there is the held call on
the line key 1.
Note
Placing a Call on Hold
To place a call on public hold:
1. Press or tap the Hold soft key on phone A when party A and party C are talking.
The icon indicators of line key 1 on phone A and phone B will become .
If the number of incoming calls is greater than the configured line keys, the line keys will be used
by sequence circulation.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm