Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
232
The Cancel, Call Pull, New Call and Barge In soft keys appear when the active call is
highlighted.
3. Tap the Barge In soft key to interrupt the active call of phone A.
Party B may hear a warning tone and then set up a conference call with the other parties of
the active call.
4. Press , tap the Hold soft key or the End Call soft key.
- If any party in the conference call presses , taps the Hold soft key, two-way voice
can be heard between the remaining parties.
- If party A or party B taps the End Call soft key, the remaining parties are still connected.
If the other party (not the shared line party) taps the End Call soft key, the conference
call is ended.
Call Pull
Call pull feature allows users to retrieve an existing call from another shared phone that is in
active or hold status. For example, when there is a call between phone A and phone C, you can
use call pull feature on phone B to retrieve this call from phone A. Then the call is established
between phone B and phone C.
To retrieve a call from another shared phone:
If there is an active call between phone A and phone C, do the following:
1. Long tap the desired line key on phone B.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm