Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
238
Enter the desired number using the keypad and then press , , or tap Send.
The phone will dial the entered number.
To place multiple calls on the bridged line:
You can have more than one call on the bridged line. To place a new call when there is an active
call on phone A, do one of the following on the phone A:
- Press or tap the Hold soft key. The original call is placed on hold.
Tap the New Call soft key to enter the dialing screen.
Enter the desired number using the keypad.
Press , , or tap Send.
Phone A will dial the entered number.
- Tap the line key. The original call is placed on hold.
Enter the desired number using the keypad.
Press , , or tap Send.
Phone A will dial the entered number.
Answering Calls
When the phone C dials the BLA number “14084588327”, an incoming call will arrive on the
bridged line. The phone A and phone B ring simultaneously. You can answer the incoming call
on either phone A or phone B but not both.
Do one of the following on phone A or phone B:
- Press , or tap the Answer soft key on phone A.
Phone B stops ringing. The icon indicator of the line key on the phone A become and
prompts “Talking”. At the meanwhile, the icon indicator of the line key on the phone B
become and prompts “Talking” indicating that there is an active call on the phone A.
- Press , or tap the Answer soft key on phone B.
Phone A stops ringing. The icon indicator of the line key on the phone B become and
prompts “Talking”. At the meanwhile, the icon indicator of the line key on the phone A
become and prompts “Talking” indicating that there is an active call on the phone B.
Placing a Call on Hold
To place a call on hold:
1. Press or tap the Hold soft key on phone A when party A and party C are talking.
The icon indicator of the line key on the phone A and phone B become and
prompt ”Public Hold” when the bridged line call is placed on hold.
Retrieving a Held Call
If there is a held call between phone A and phone C, you can retrieve a held call on either phone

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm