Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
244
You can tap the IME soft key to change the input mode.
3. Tap the Save soft key to accept the change or to cancel.
Note
To listen to voice mails:
1. When the touch screen prompts that the phone receives a new voice mail, you can press
or tap Connect to dial out the voice mail access code.
2. Follow the voice prompt to listen to your voice mails.
You can tap the icon when the phone is idle to open the dialog box, and then tap Connect.
Note
To view the voice mail via phone user interface:
1. Tap ->Message->Voice Mail->View Voice Mail.
The touch screen displays the amount of new and old voice mails.
Voice mail access codes must be predefined on the system server. Contact your system
administrator for the more information.
Before listening to voice mails, ensure that the voice mail access code has been configured.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm