Yealink SIP-T48G

User Guide for the SIP-T48G IP Phone
28
Manually Connect to an Available Wireless Network
To manually connect to a wireless network via phone user interface:
1. Tap ->Basic->Wi-Fi.
2. Tap the On radio box of the Wi-Fi field.
The IP phone scans the available wireless networks in your area.
3. (Optional.) To re-search the available network, tap the Scan soft key.
4. Tap the desired wireless network to connect to your IP phone.
You can also tap after the desired wireless network, and then tap Connect.
5. If the network is secure, enter its password in the PIN field.
6. Tap OK.