Yealink SIP-T48G User Manual

Getting Started
39
Input Mode
Keypad
2aB
abc
Abc
(initials in
capitals)
ABC
123
#
#
#
#
#
To enter or edit data:
1. Tap the field.
2. Do one of the following:
If you want to
Then you can
Enter only digits (1),
uppercase (A) characters,
lowercase (a) characters, or
alphanumeric (2aB)
characters.
Press a keypad key one or more times (depending
on what input mode you’re in) to enter the
characters that is displayed on the keypad key.
You can tap or abc one or more times to
switch among uppercase (ABC), numeric (123),
alphanumeric (2aB), uppercase and lowercase
(Abc) and lowercase (abc) input modes.
For example, if the input mode is ABC:
- To enter “A”, press once.
- To enter “B”, press twice quickly.
- To enter “C”, press three times quickly.
- To enter “2ÄÆÅÀÁÂÃÇ”, press more
than three times quickly.
Note: When you are in the uppercase (ABC),
uppercase and lowercase (Abc) or lowercase (abc)
input mode, is not available.
Enter special characters.
Press the keypad key or , or
press .
For Key:
- If it is in the uppercase (ABC), uppercase and
lowercase (Abc) or lowercase (abc soft key)
input mode, it will provide the space
character.
- If it is in the numeric (123) or alphanumeric
(2aB) input mode, it will only provide the
digit 0.
- If it is in the numeric (123) or alphanumeric
(2aB) input mode, it will provide the special
character + by long pressing about 2 seconds
on the dialing/pre-dialing screen.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm