Yealink T27G

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
12
IP->IPv6 IP Prefix
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)->Network->WAN
Port->IPv6->Static IPv6 Client->IPv6 IP Prefix
Parameter
static.network.ipv6_internet_port.gateway
[1]
<y0000000000xx>.cfg
Description
It configures the IPv6 default gateway.
Example:
static.network.ipv6_internet_port.gateway = 3036:1:1:c3c7:c11c:5447:23a6:255
Note: It works only if “static.network.ip_address_mode” is set to 1 (IPv6) or 2 ( IPv4 &
IPv6), and "static.network.ipv6_internet_port.type" is set to 1 (Static IP Address).
Permitted
Values
IPv6 Address
Default
Blank
Web UI
Network->Basic->IPv6 Config->Static IP Address->Default Gateway
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv6->Static
IP->Default Gateway
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)->Network->WAN
Port->IPv6->Static IPv6 Client->Default Gateway
Parameter
static.network.ipv6_static_dns_enable
[1]
<y0000000000xx>.cfg
Description
It triggers the static IPv6 DNS feature to on or off.
Note: It works only if “static.network.ipv6_internet_port.type” is set to 0 (DHCP).
Permitted
Values
0-Off, the IP phone will use the IPv6 DNS obtained from DHCP.
1-On, the IP phone will use manually configured static IPv6 DNS.
Default
0
Web UI
Network->Basic->IPv6 Config->IPv6 Static DNS
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->WAN
Port->IPv6->Type(DHCP)->Static DNS
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv6->DHCP IPv6 Client->Static DNS
Parameter
static.network.ipv6_primary_dns
[1]
<y0000000000xx>.cfg
Description
It configures the primary IPv6 DNS server.