Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
434
Topics
Directed Call Pickup Configuration
Dialog Info Call Pickup
Directed Call Pickup Configuration
You can enable directed call pickup, the LCD screen will display a DPickup soft key when picking up the
handset, pressing the Speakerphone key or pressing the line key (You may need to press the More soft
key to see the DPickup soft key). As shown below:
You can configure a directed call pickup code and pick up the incoming call using the DPickup soft key.
You can set a DSS key as a Directed Pickup key, and specify a contact you want to pick up a call from for this
key. For more information, refer to DSS Keys.
The following table lists the parameters you can use to configure directed call pickup.
features.pickup.direct_pickup_enable
It enables or disables the user to use DPickup soft key when performing directed call
pickup feature.
0-Disabled
1-Enabled, the phone will display the DPickup soft key on the Dialing screen.
Features->Pick up & Park->Directed Call Pickup
features.pickup.direct_pickup_code
It configures the directed call pickup code on a phone basis.
Note: The directed call pickup code configured on a per-line basis
(“account.X.direct_pickup_code”) takes precedence over that configured on a phone
basis (“features.pickup.direct_pickup_code”).
String within 32 characters
To Next Page
Loading...
