Yealink VCM34 Administrator's Guide

| Configuring Account Settings | 108
Parameter Description Configuration Method
Server Host/Server
The IP address or domain name
of the Pexip server.
Note: the default value is blank.
Web user interface
Endpoint
CTP20/CTP18
Port
The port of the Pexip server.
Default: 0.
Web user interface
Endpoint
CTP20/CTP18
Remember password
Enable or disable remembering
password.
Note: the default value is Off.
If it is set to On, the password
will be filled in automatically
when you enter the username
next time.
Endpoint
CTP20/CTP18
Transport
Specify the transport protocol for
transmitting the SIP signaling.
The supported protocols are as
follows:
• UDP—it provides the
best transmission for SIP
signaling.
• TCP—it provides a reliable
transmission for SIP
signaling.
• TLS—it provides a safe
transmission for SIP
signaling. TLS is available
only when the device is
registered on a SIP server
that supports TLS.
• DNS-NAPTR—the device
performs the DNS NAPTR
and SRV request to find the
service type and the port if no
server port is given.
Default: TCP.
Web user interface
Server Expires
The registration timeout (in
seconds) of the device.
After the timeout, the device will
send the registration request to
the server again.
Default: 3600 seconds.
Web user interface

Yealink VCM34 Specifications

General

Product type	Microphone
Product color	Black, Grey
LED indicators	Yes
Package depth	196 mm
Package width	310 mm
Package height	80 mm
Package weight	4260 g
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	2
Power source type	PoE
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 90 %
Quantity	1
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	171.5 mm
Width	169 mm
Height	37.5 mm