| Traditional Deployment Methods | 65
Note:
If you configure H.323 settings and enable H.460 support, the system ignores the static NAT
settings automatically.
• Configuring H.460 for H.323 Protocol
Configuring H.460 for H.323 Protocol
If you want to make private-to-public calls via H.323 protocol, you can enable H.460 feature for H.323
protocol.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > H.323 > H.460 Active.
• On your VCS, go to More > Settings > Advanced > Account > H.323 > H.460.
For VP59, tap > Settings > Advanced > Account > H.323 > H.460.
•
On your CTP20/CTP18, tap > Settings > Advanced > Account > H.323 > H.460.
2. Configure and save the following settings:
Parameter Description Configuration Method
H.460 Active
Enable or disable H.460 firewall
traversal for H.323 calls.
Default: Disabled.
Web user interface
Endpoint
CTP20/CTP18
Related tasks
Setting H. 323 Account/H.323 IP Call
Intelligent Traversal
Some branch offices lack IT professionals, which means that professional network configuration (for
example, the port forwarding) may be impossible. To solve this issue, Intelligent Traversal allows you to
simply deploy your VCS in the intranet, and assign an IP address to VCS, which can be used to access the
public network. After that you can place calls to the VCS in the public network via your intranet VCS.
This type of deployment is simple to deploy, plug and play, and does not require complex network
configuration. However, this method is not applicable to the incoming calls.
• Configuring Audio & Video Intelligent Traversal
• Configuring Data Intelligent Traversal
To Next Page
Loading...
Need help?
General
Weight and Dimensions
