Yealink W52H - Date, Time, and Shortcuts Configuration

Handset Settings
25
calls respectively.
To configure the notification light:
1. Press to enter the main menu.
2. Select Settings->Display->Notification Light.
3. Press or to select the desired value from the Voice Mail field.
If Enabled is selected, the message key LED flashes red when the handset receives
a new voice mail.
4. Press or to select the desired value from the Missed Call field.
If Enabled is selected, the message key LED flashes red when the handset receives
a new missed call.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
The date and time display on the idle screen of your handset. The handset obtains the
date and time from the Simple Network Time Protocol (SNTP) server by default. If your
handset cannot obtain the date and time from the SNTP server, you can configure the
date and time manually.
You can also configure the time format and date format respectively. The handset
supports two time formats (12 Hour or 24 Hour) and six date formats. The available date
formats are listed in the following table:
Date Format
Example(2011-8-17)
d M,D
17 Aug,Wed
M d,D
Aug 17, Wed
D,d M
Wed,17 Aug
DD/MM/YYYY
17/08/2011
MM/DD/YYYY
08/17/2011
YYYY/MM/DD
2011/08/17
To configure the date and time manually:
1. Press to enter the main menu.
2. Select Settings->Date & Time.
3. Edit the current values in the Date and Time fields.
4. Press the Save soft key to accept the change.
The date and time that display on the LCD screen will change accordingly.