Yealink W52H

User Guide W52P/W52H IP DECT Phone
44
Ring Time field (only available for No Answer Forward).
8. Press the Save soft key to accept the change.
The icon on the idle screen indicates the call forward feature is enabled.
If Always Forward is selected, there is no prompt on the LCD screen when the line
receives an incoming call. The incoming call is logged in the Accepted Calls list.
Note
You can transfer a call to another party in one of the following ways:
 Blind Transfer: Transfer a call directly to another party without consulting.
 Semi-Attended Transfer: Transfer a call when receiving the ring-back.
 Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press during a call.
2. Enter a number or press the Directory soft key select an entry from the local
directory.
You can also press to highlight the handset name you want to transfer the call
to.
3. Press or the Transfer soft key to complete the transfer.
The call is connected to the number or handset which you have specified, and the
LCD screen prompts the message ―Call Transferred‖.
To perform a semi-attended transfer:
1. Press the Options soft key during a call, and select Transfer.
2. Enter a number or press the Directory soft key select an entry from the local
directory.
You can press to highlight the handset name you want to transfer the call to.
3. Press the Transfer soft key to dial out.
You can press the End soft key to cancel the transfer.
4. Press or the Transfer soft key to complete the transfer when receiving the
ring-back.
The LCD screen prompts the message ―Call Transferred‖.
To perform an attended transfer:
1. Press the Options soft key during a call, and select Transfer.
Call forward feature may be overridden by the server settings. For more information,
contact your system administrator.