Yealink W52H - Page 57

Call Features
45
2. Enter a number or press the Directory soft key select an entry from the local
directory.
You can press to highlight the handset name you want to transfer the call to.
3. Press or the Transfer soft key to dial out.
You can press the End soft key to cancel the transfer.
4. Press or the Transfer soft key to complete the transfer after the party answers
the call.
The LCD screen prompts the message ―Call Transferred‖.
You can use the handset to create a local conference with other parties. The handset
supports up to 3 parties (including yourself) in a conference call. You can create a
conference between an active call and a held call on the handset (on the same line or
different lines).
To set up a local conference call:
1. Place a call to the first party.
2. Press the Options soft key, and select Conference.
The active call is placed on hold.
3. Enter a number of the second party or press the Directory soft key select an entry
from the local directory.
You can press to highlight the handset you want to add to the conference.
4. Press or the Conf. soft key to dial out.
5. When the second party answers the call, you can consult with him or her before
adding to the conference.
6. Press the Conf. soft key again to join all parties in the conference.
To join two calls in a conference:
1. Place two calls using two different lines on the handset (for example, place the first
call using line 1, and then place the second call using line 2).
2. Select the desired call and make sure the call is active (for example, select the call
on line 1).
3. Press the Options soft key, and select Conference.
Two calls are joined in the conference on line 1.
To drop the conference call, press or the End soft key.