User Guide W52P/W52H IP DECT Phone
46
You can use anonymous call feature to block the identity and phone number from
showing up to the called party when you call someone. For example, you want to call to
consult some service, but you don‘t want to be harassed. You can configure the
anonymous call feature on a per-line basis.
Note
To enable the anonymous call feature on the specific line:
1. Press to enter the main menu.
2. Select Call Features->Anonymous Call.
The outgoing lines currently assigned to the handset display on the LCD screen. The
default outgoing line is highlighted and followed by a left arrow.
3. Press or to highlight the desired line, and press the OK soft key.
4. Press or to select Enabled from the Status field.
5. Press the OK soft key to accept the change.
To place an anonymous call:
1. Using the specific line on the handset to place a call.
The LCD screen of the handsets receiving this call prompts an incoming call from
anonymity.
You can use anonymous call rejection feature to reject incoming calls from anonymous
callers. Anonymous call rejection automatically rejects incoming calls from callers who
deliberately block their identities and numbers from showing up. You can configure the
anonymous call rejection feature on a per-line basis.
To enable the anonymous call rejection feature on the specific line:
1. Press to enter the main menu.
2. Select Call Features->Anon.Call Rejection.
The incoming lines currently assigned to the handset display on the LCD screen.
3. Press or to highlight the desired line, and press the OK soft key.
4. Press or to select Enabled from the Status field.
5. Press the OK soft key to accept the change.
To Next Page
Loading...
