Yealink W52H

User Guide W52P/W52H IP DECT Phone
34
The radio box of the selected configuration type is marked.
You can reset any individual settings and changes that you have made. Resetting your
handset will not affect the entries of the local directory, the call log, the voice mail and
the handset‘s registration. But you need to note that other customized settings will be
reset to factory default settings after resetting. We recommend that you ask your system
administrator for advice before resetting your handset.
To reset the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Handset Reset.
The LCD screen prompts the warning ―Reset handset to default?‖.
3. Press the Yes soft key to reset the handset or the No soft key to cancel.
You can trigger the auto provisioning process using the VoIP wizard. After you enter the
username and password in the wizard and confirm to perform an update, the base
station tries to connect to the RPS server. If the base station successfully connects to the
RPS server, the RPS server responds the base station with the URL from where to
download the configuration files. Then the base station tries to perform the auto
provisioning.
To trigger the auto provisioning using the VoIP wizard:
1. Press to enter the main menu.
2. Select Settings->System Settings->VoIP Wizard.
3. Enter the system PIN (default: 0000) and press the Done soft key.
4. Enter the desired value in the Username field and press the OK soft key.
5. Enter the desired value in the Password field and press the OK soft key.
The LCD screen prompts the warning ―Update now?‖.
6. Press the Yes soft key to perform an update or press the No soft key to cancel.