Yealink W52H

Basic Operations
13
This chapter provides you with the basic operating instructions of the handset. The
topics include:
 Handset Registration
 Basic Network Settings
 Checking System Status
 Account Registration
 Checking Line Status
 Turning Handset On/Off
 Adjusting Ringer Volume
 Locking/Unlocking Keypad
 Locating a Handset
 Switching Silent Mode On/Off
 Menu Guidance
If you require additional information or assistance with your new handset, contact your
system administrator.
You can register up to 5 handsets to one W52P base station. Each handset can be
registered to 4 base stations. You can then choose the desired one to use.
To register a handset manually:
1. Long press on the base station.
The registration LED slow flashes, indicating the base station is in the registration
mode.
2. Press on the handset to enter the main menu.
3. Select Settings->Registration->Register Handset.
The LCD screen displays the base (1-4).
4. Press or to highlight the desired base, and press the OK soft key.
The handset begins to search for the base station.
5. Press the Subscribe soft key when the LCD screen displays the ID of the base
station.
6. Enter the system PIN (default: 0000).
7. Press the Done soft key.