Yealink W52H

User Guide W52P/W52H IP DECT Phone
14
The handset plays a warning tone and prompts the message ―Handset
Subscribed‖, which indicates the registration has finished.
After successful registration, the handset number and name appear on the LCD screen.
To unregister a handset:
1. Press on the handset to enter the main menu.
2. Select Settings->Registration->De-reg.Handset.
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
The names of the handsets registered to the same base station display on the LCD
screen. The name of the handset itself is highlighted and followed by a left arrow.
5. Press or to highlight the desired handset name.
6. Press the OK soft key to unregister the selected handset.
The LCD screen prompts the message ―De-register Handset‖.
7. Press the Yes soft key to confirm the logout or the No soft key to cancel.
To select the base station:
1. Press on the handset to enter the main menu.
2. Select Settings->Registration->Select Base.
All base stations the handset registered to and the Bestbase option (if the handset
is registered to more than one base stations) display on the LCD screen. The radio
box of the currently used base station is marked. You can select Bestbase to search
for the base station with the best signal strength.
3. Press or to highlight the desired base station, and press the Select soft
key.
The handset begins to search for the base station. After successful connection, the
handset plays a warning tone and prompts the message ―Base selected
successfully!‖.
If your base station cannot contact a DHCP server for any reason, you need to configure
a static IP address manually.
To configure a static IP address manually.
1. Press to enter the main menu.
2. Select Settings->System Settings->Network.
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
5. Press or to select Static from the IP Address Type field.