Yealink W52H

Call Features
43
You can activate or deactivate the DND mode on a per-line basis. If DND mode is
activated on a line, all incoming calls of the line will be rejected automatically, and the
callers will hear a busy signal.
To activate DND mode on the specific line:
1. Press to enter the main menu.
2. Select Call Features->Do Not Disturb.
The incoming lines currently assigned to the handset display on the LCD screen.
3. Press or to highlight the desired line, and press the OK soft key.
4. Press or to select Enabled from the Status field.
5. Press the OK soft key to accept the change.
The icon on the idle screen indicates the DND mode is activated. You can press the
Line soft key on the idle screen to check the line status. The icon in the bottom of a
line indicates that the DND mode is activated on this line.
The handset will reject all incoming calls of the line, and a missed call icon appears
on the idle screen.
You can enable the call forward feature on a per-line basis. The handset will forward
incoming calls of the line to another party. There are three forwarding types:
 Always Forward: Incoming calls are immediately forwarded.
 Busy Forward: Incoming calls are immediately forwarded if the line is busy.
 No Answer Forward: Incoming calls are forwarded if not answered after a period of
time.
To enable the call forward feature on the specific line:
1. Press to enter the main menu.
2. Select Call Features->Call Forward.
The incoming lines currently assigned to the handset display on the LCD screen.
3. Press or to highlight the desired line, and press the OK soft key.
4. Press or to highlight the desired forwarding type, and press the OK soft
key.
5. Press or to select Enabled from the Status field.
6. Enter the destination number you want to forward incoming calls to in the Target
field.
7. Press or to select the desired ring time to wait before forwarding from the After