Yealink W52H

Handset Settings
27
The local directory of your handset stores the names and phone numbers of your
contacts. This allows you to make calls without having to dial manually. You can store up
to 100 contacts, each with a name, a mobile number and an office number. You can add,
edit, delete or search for contacts in the local directory. You can also dial a contact or
assign a number to speed dial from the local directory.
The directory entries are sorted by the attribute ―name‖. The sort order of the directory
entries is as follows (lower number with higher priority):
1. Space
2. Digits (0-9)
3. Letters (alphabetical)
Other special characters are sorted completely in accordance with the ASCII sort order.
You can edit the names and numbers of the contacts stored in the local directory using
the keypad. The digit keys 0-1 are devoid of any letters. But the other digit keys (2-9) are
all alphanumeric keys containing one digit and three or four letters in alphabetical order.
The following describes how to use the alphanumeric keys in detail.
To configure the input methods:
The handset provides you with 8 different input methods. You can disable some
infrequently used input methods. Then you can only switch among the enabled input
methods when editing.
1. Press to enter the main menu.
2. Select Settings->Display->Input Method.
The LCD screen displays all available input methods.
3. Press or to highlight the desired input method.
4. Press the Change soft key to check or uncheck the checkbox.
To enter a character:
You can press the key which contains your desired character a certain number of times,
the corresponding character will be entered and appear in the editing field after a
timeout, or when another key is pressed.
You can enter multiple characters using the same method.